RIGHT HANDEL SWITCHES
ENGINE STOP SWITCH 1
The engine can only start up
when the switch is placed at the
"*" position, and the ignition
circuit is connected.
If the
switch is at the "%" position, the
ignition circuit is cut off. This is
an emergency stop switch.
ELECTRIC STARTUP BUTTON 2 #
This button is used for operating the starter motor. With
the ignition switch at the "*" position, the engine stop
switch at "*" and the transmission in neutral, grasp the
clutch lever and push the electric starter button # to
operate the starter motor to start the engine.
BWARNING
Engaging the starter motor for five at a time can
damage the start motor and wiring harness from
overheating.
Do not engage the starter motor for more than five
seconds at a time. If the engine does not start after
several attempts, check the fuel supply and ignition
system.
Refer to the "TROUBLESHOOTING"
section in this manual.
Haojue TZ150S 99011H36640H000 V01 ES+EN 2015-1-17
Accelerate
THROTTLE GRIP 3
The engine speed is controlled by the position of the
throttle grip. Turn it toward you to increase engine speed.
Turn it away from you to decrease engine speed.
FRONT BRAKE LEVER 4
The front brake is applied by grasping the brake lever
gently toward the throttle grip. The brake light will be alight
when the brake lever is grasped inward.
12
https://www.motomanuals.net/
Haojue TZ150S 99011H36640H000 V01 ES+EN 2015-1-17
BWARNING
When cleaning the motorcycle, do not directly
clean its electric parts, particularly its handle
switch.
BWARNING
Do not use the electric start function and the kick
lever function at the same time.
BWARNING
Do not start the motorcycle when the fuel or engine
oil is insufficient.
(71)
EN
(71)