Haojue TZ150S 2015 Manual De Uso página 96

two things: idle and throttle cable free-play.
Adjustment of idle speed
1. Start the engine, keep it running
at idle till fully pre-heated.
2. After the engine has been pre-
heated, release the throttle, turn
the adjusting screw to right and
left to keep the engine revolving speed between 1500–
1700 rpm.
BCAUTION
Adjustment the engine idle speed should be done
when the engine has been fully pre-heated.
THROTTLE CABLE PLAY
1. Remove the rubber bush(s)
along the throttle cable.
2. Loosen lock nut 1.
3. Turn the adjuster 2 so that
the throttle cable has 0.5–1.0mm
play.
4. Tighten the lock nut 1.
5. Reinstall the rubber bush(s).
Haojue TZ150S 99011H36640H000 V01 ES+EN 2015-1-17
DRIVE CHAIN
When making regular checkup, please check the following
items regarding the drive chain.
1. Loose chain pin
2. Damaged roller
3. Dried or rusted chain segments
4. Chain segments that turns with difficulty
0.5–1.0mm
5. Excessive abrasion
6. Wrongly adjusted chains
If the drive chain has the above problems, the most
probable reason is a damaged sprocket. Please check
the following.
36
https://www.motomanuals.net/
Haojue TZ150S 99011H36640H000 V01 ES+EN 2015-1-17
BWARNING
Inadequate throttle cable play can cause engine
speed to rise suddenly when you turn the
handlebar. This can lead to loss of rider control.
Adjust the throttle cable play so that engine idle
speed does not rise due to handlebar movement.
BWARNING
To ensure safety, checkup and adjustment of the
drive chain should be completed before actual
riding.
(95)
EN
(95)