GreenWorks GD40BC Manual Del Operario página 12

Problem Possible Cause Solution
The line The machine is
keeps used incorrectly.
breaking.
The grass Cut tall grass at
winds ground level.
around the
trimmer
head and
motor
housing.
The line The cut-off blade
does not becomes dull.
cut well.
Vibration The line is worn
increases down at one side
obviously. and not exten-
ded in time.
8 TECHNICAL DATA
Voltage 40 V
No load speed 5500min
cutter)
Cutting head Bump feed / Brush cutter blade
Cutting line diam- 2 mm
eter
Cutting path di- 356/406 mm (Grass trimmer), 254
ameter mm (Brush cutter)
Weight (without 4.9 kg
battery pack)
Battery model G40B2/G40B4 and other BAF ser-
ies
Charger model G40C and other CAF series
Grass trimmer Measured
sound pressure
level
Guaranteed
sound power
level
Vibration
English
1. Cut with the tip of
the line, avoid stones,
walls and other hard
objects.
2. Advance the cutting
line regularly to keep
full cutting width.
1. Cut tall grass from
the top down.
2. Remove no more
than 20 cm in each
pass to prevent wrap-
ping.
Sharpen the cut-off
blade with a file or re-
place it.
Make sure that the line
on both sides is equal.
Extend the line.
-1
(Grass trimmer / Brush
L =83 dB(A),
PA
K = 3 dB(A)
pA
L = 96 dB(A)
WA.d
2
3.5 m/s , k=1.5
2
m/s
Brush cutter Measured
sound pressure
level
Guaranteed
sound power
level
Vibration
96 dB. Noise value. (Grass trimmer)
XX
96 dB. Noise value. (Brush cutter)
9 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website https://www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Swe-
den
Name and address of the person authorised to compile
the technical file:
Name: Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Swe-
den
Herewith we declare that the product
Category:
Model:
9
L =82dB(A), K=
PA
3 dB(A)
L =96 dB(A)
WA.d
2
3.5 m/s , k=1.5
2
m/s
String trimmer / Brush cutter
2100207 (STF456)
EN