Publicidad
DESCRIPTION OF CONTROLS
1. Tweeter
2. Woofer
3. Bass Reflex hole
4/5.Output for satellite speaker
6. AUX input
7/8.INPUT input (red and white plugs)
9. ON/OFF switch
10. Power supply cable AC 100-240V~50/60Hz
11. USB input
12. PLAY/PAUSE button
13. micro-SD input
14. Led indicator
15. MODE button
16. PREV button
17. NEXT button
18. Bluetooth button
19. General volume control
CONNECTING SPEAKERS
1. Connect the satellite speaker to the amplified speaker using the supplied cable in its output (4/5).
POWER AND ADJUSTMENTS
1. Turn the ON/OFF power switch (9) to position 1 to switch on the device.
2. Adjust the overall volume through its control (19).
3. Turn the ON/OFF power switch (9) to position 0 to switch off the device.
USING THE MP3 PLAYER
1. Insert a micro-SD Card into the micro-SD input (13) and/or a USB device into the USB input (11). Playback
will start automatically.
2. Press the PLAY/PAUSE button (12) to stop playback temporarily . Press again to resume.
3. Press the NEXT (17) or PREV (16) button to move to the next or previous track.
4. Press the MODE button (15) to switch between inputs USB and micro-SD (TF card).
5. Led indicator (14): flashing red indicates the current playback, steady red indicates playback paused.
INPUT LINE IN USE
1. Connect the RCA connectors of an audio cable to the INPUT input (7/8) of amplified speaker and the
jack plug to the headphone jack or line-out output of an audio source (TV/Monitor,Tablet, smartphone,
MP3 players, DVD/Mepg4 players, computers, etc...).
2. Alternatively, you can connect a jack of an audio cable (not supplied) to the AUX input (6) input of the
amplified speaker and the other jack of the audio cable to the headphone jack or the line-out output of
an audio source.
NOTE: in the case of INPUT and AUX both related, will play the source connected to the input AUX.
NOTE: we recommend that you do not set the volume of the audio source is too high in order not to saturate the
speaker input.
3. Press the MODE button (15) to switch to AUX input.
USE OF THE BLUETOOTH
1. Press the MODE button (15) or the Bluetooth button (18) to switch to Bluetooth input.
2. The Led indicator (14) will begin to Flash rapidly for red and blue looking for devices to be paired.
3. Start the Bluetooth function on your device to search and to pair the speaker "AVX 570 BT".
4. After pairing the Led indicator (14) will be steady blue.
5. Use the buttons PLAY/PAUSE (12), NEXT (17) and PREV (16) as for the use of the MP3 player.
6. Led indicator (14): flashing blue indicates the current playback, steady blue indicates playback paused.
TECHNICAL CHARACTERISTICS
Total max power:......................................................70W
Frequency Response:...............................................80Hz-18KHz
Bluetooth transmission power:.............................2,5mW
Bluetooth
transmission:..........................................2,4GHz
Speakers Dimensions:..............................................135x225x180mm
Power Supply:............................................................100-240V~50/60Hz
AVX 570 bt
6
Publicidad
