Tempish ROLLER SKATES Manual De Instrucciones página 53

UK
Type „A"
This type of fitting is the most typical and also the easiest to adjust. Use a key of size 13 mm (14 mm) for adjustment. Simply loosen or tighten „nut 1". This increases or reduces the stiffness of the trucks.
Type „B"
This type of fixing is slightly more complicated to adjust. Use a key of size 14 mm and 17 mm for adjustment. Simply loosen „nut 1" which allows „Locknut 2" to be loosened. Now you can adjust the stiffness of the
trucks by tightening or loosening „Locknut 2". Then just tighten „nut 1" until the „Locknut 2" touches the frame. At this point stop tightening „nut 1" and tighten „nut 2" against the frame so that „nut 1"
cannot loosen itself.
SETTING THE STIFFNESS OF THE TRUCKS FOR QUAD SKATES
The stiffness of the trucks can also be regulated by replacing the cushions with harder/softer ones.
Make sure during replacement that the cushions are the correct size and respect the manufacturer's recommendations.
CERTIFICATE OF WARRANTY:
TEMPISH Ltd. provides 2 years warranty from date of purchase according to the Civil Law.
Exact date of purchase has to be stated here, with stamp and signature.
Claim has to be applied right after you have noticed the defect!
When buying the product, try and have a look both boots!
The claim doesn't applies, when skates are regularly timeworn or if are mechanically damaged because of improper use (see use instructions carefully).
In case of claims, contact please TEMPISH company.
Date of purchase.....................................................................................................................................................................................................................................................................................................................
Seller:.......................................................................................................................................................................................................................................................................................................................................
Defect description.....................................................................................................................................................................................................................................................................................................................
How the defect occurred?:.......................................................................................................................................................................................................................................................................................................
Distributor statement:...............................................................................................................................................................................................................................................................................................................
Authorized representative: TEMPISH Ltd., bratri Wolfu 495/16, 779 00 Olomouc, Czech Republic, www.TEMPISH.eu