Publicidad
Idiomas disponibles
Idiomas disponibles
Special tips for using security
4 safe use method of charger:
It is forbidden to place any items on the charger
It is forbidden to put any li uid or metal into the charger
It is strictly prohibited to disassemble and modify the charger
hen charging, insert the output of the charger into the charging port of the battery pac
insert the AC power plug of the charger into the Mains soc et It is forbidden to plug and remove the power plug
with wet hands
Do not use the charger when thunder and lightning
Do not play with the charger and battery pac when charging
Do not use the charger in unstable, e cessive lampblac and dust and e cessively humid environments
eep good ventilation and heat dissipation conditions when the charger wor s, and avoid using the charger
in direct sunlight;
When the output of the charger is not connected to the battery pack, do not connect the charger to the
mains for a long time
During the charging process, the indicator light of the charger is red. When the indicator light turns green,
continue charging for 2 hours to be fully charged;
The normal charging time is 3-10 hours no more than 12 hours , and the fast charging station is not allowed
to charge.
Note: when replacing the charger, it should match the battery model；The special charger provided by our
company must be used, and other Chargers are not allowed to charge the battery pac .
5 recautions for washing:
hen washing the bicycle, do not directly splash water on the bra e drum, motor and front and rear a le to
prevent water from a ecting the service performance and life
Do not use steam or high-pressure water pipes when washing bicycle
ay special attention to the wor ing condition of the bra e after cleaning the vehicle or driving in the water.
After cleaning or driving in the water, the bra ing e ect may decrease. At this time, pay attention to safety when
driving slowly.
6 Ad ustment of handlebar and saddle if applicable
hen ad usting the handlebar or saddle, be careful not to e pose the safety line mar of stem and saddle
pipe;
After ad usting the hori ontal pipe, stem, saddle and saddle pipe, pay attention to fastening, and the
recommended tor ue is 18N.m.
A NIN 1
As with all mechanical components, E AC is sub ected to wear and high stresses. Di erent
materials and components may react to wear or stress fatigue in di erent ways. If the design life of a
component has been e ceeded, it may suddenly fail, possibly causing in uries to the rider. Any form of
crac , scratches or change in color in highly stressed areas indicates that the component has been reached
its service life and should be replaced.
A NIN 2
For composite components impact damage may be invisible to the user, the manufacturer
shall e plain the conse uences of impact damage and the conse uences in the event of an impact
composite components should be returned to the manufacturer for inspection or destroyed and replaced.
rst, and then
03
Publicidad
