1.a. Internet connection through Wi-Fi:
•
Enable Wi-Fi access by marking the checkbox
•
Establish the priority of this connection (0: higher priority; 1: lower priority)
•
Select the Wi-Fi network from those available (Main SSID drop-down). Enter the
network password
•
Set up network configuration: DHCP or MANUAL
•
If MANUAL is selected, please enter the values of the IP Address, Subnet, Router
and DNS
1.b. Internet connection through Ethernet network:
•
Enable access via Ethernet by marking the checkbox
•
Establish the priority of this connection (0: higher priority; 1: lower priority)
1.c. Internet connection through LTE network (ref. A5A5379C00 only)
•
Enable access via LTE by marking the checkbox
•
Enter access point name, APN, of the LTE service provider
•
Enter the PIN code assigned to the nano-SIM card
2.
Save setup by clicking on SAVE.
25