Publicidad
Idiomas disponibles
Idiomas disponibles
ANER
HIGH PERFORMANCE CORDLESS VACUUM CLE
14
1. Place the unit near an electrical power outlet and plug in the charger.
2. Connect the charger to the charging socket. The battery status indicator
lamp will dynamically shine to indicate that the vacuum cleaner is property
connected to the charger and that the unit is being charged. When it's fully
charged, all of the 3 lamps will turn off.
Detach the cordless vacuum cleaner from the unit
Note: Ensure that the unit is not connected to the charger before removing the
handheld vacuum cleaner.
1. To remove vacuum cleaner from the unit, push the tube release button
to pull out the tube from the vacuum cleaner. Grasp the handle of vacuum
cleaner and pull out of the extended tube
2. You can use the Z vacuum cleaner directly. If need to reassemble the unit,
please refer the instructions in "assemble the unit".
Use the vacuum cleaner in handeld mode
Note: Please take out the vacuum cleaner from the charger before use. If the
vacuum cleaner is in charging or low battery status, the vacuum cleaner and
floor brush will not work.
1. The cordless vacuum cleaner can be used directly. The crevice nozzle (16)
and the combo brush (18) can be used with the handheld vacuum cleaner
directly, without using the tube. If you have the connection converter, it can be
connected with your other suitable brushes.
2. Press the power switch to alternate between settings (I) (normal power), (II)
(max power) and off.
Use the upright vacuum cleaner
Note: Please take out of the charger before use the vacuum cleaner. If the
vacuum cleaner is charging or very low battery status, the vacuum cleaner and
floor brush will not work.
1. To use the vacuum cleaner in upright mode, ensure that the vacuum cleaner
is connected with the extended and floor brush rightly.
2. Press the power switch on main handle or press the power switch on
vacuum cleaner to alternate between settings (I) (normal power), (II)(max
power) and to turn off.
3. Check if your model is with power brush and al. tube, if yes you can use as
follows, whichever is convenient for you.
Depending on your preference, you can move the motor housing in the upper
Publicidad
