Publicidad
Idiomas disponibles
Idiomas disponibles
HIGH PERFORMANCE CORDLESS VACUUM CLE
16
PROBLEM
handheld
vacuum cleaner
does not work
Motorised brush
does not work
handheld
vacuum cleaner
cannot pick-up
dust; suction
power become
weak
Dust leak
from handheld
vacuum cleaner
TROUBLE SHOOTING GUIDE
POSSIBLE REASON
1. batteries discharged.
2. dead battery(battery won't
hold charge).
3. connector between the unit
and the charger are dirty.
4. no power in electrical outlet
supplying transformer.
5. charger is plugged in.
6. System is protected.
1. the rolling brush is blocked
with dirty, string, hair, etc.
2. the belt is broken.
3. handheld vacuum cleaner is
not connected correctly.
1. dust container is full.
2. Dust filter needs cleaning or
replacement.
3. unit needs recharging.
1. dust container is full.
2. dust filter is not installed
correctly.
3. puncture/hole in dust filter
ANER
POSSIBLE SOLUTION
1. charge unit.
2. call customer service or
dispose of unit.
3. wipe and clean dirt from
connector.
4. check fuse or breaker,
replace fuse/reset breaker.
5. unplug charger.
6. activate the system with the
charger.
1. remove dirty from rolling
brush. If there is string or
thread wrapped cut gently with
scissors.
2. call customer service
3. connect the handheld
vacuum cleaner correctly.
1. empty dust container
2. remove dust filter assembly
and check for object(s) in
suction inlet and remove.
Clean or replace dust filter
assembly.
3. charge unit.
1. empty dust container
2. Review the dust filter
assembly installation
instructions.
3. replace dust filter assembly.
Publicidad
