Descargar Imprimir esta página

Carlo Cracco MaserPRO BGMP-9175 Manual De Instrucciones página 9

Freidora de aire

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
EN
Note: use the below table for reference only. Actual cooking time and temperature may have to be adjusted
depending on the food quantity or size.
Icons
Preset
Chips
Chops
Prawns
Baking
Drumsticks
Steaks
Fish
Pizza
Bacon
Heating
Defrost
4. Time Setting Buttons
• Use the time control button for the cooking time of the corresponding pan setting.
• Time control buttons enable you to select exact cooking time by minute. You can increase or decrease
time by 1 minute from 1 minute to 60 minutes.
• You can touch the time setting buttons to set the time before or during cooking.
• Press and hold the time setting buttons for faster running of the time.
5. Temperature Setting Buttons
• Use the temperature control button for the cooking temperature of the corresponding pan setting.
• Temperature control buttons enable you to raise or lower cooking temperature by 5℃ starting from 80℃
to 200℃ under normal operating conditions, and 40℃ to 70℃ under preset function on defrost.
• You can touch the temperature setting buttons to set the temperature before or during cooking.
• Press and hold the temperature setting buttons for faster increments of the temperature.
6. Digital Display
• The Digital Display shows the time and temperature in alternate turns.
• It shows set time and temperature during setting and the remaining time and cooking temperature during
cooking.
• Check the correct time and temperature for the corresponding pan.
Time
Temperature
20 minutes
200℃
15 minutes
200℃
20 minutes
200℃
6 minutes
190℃
20 minutes
200℃
20 minutes
200℃
25 minutes
170℃
25 minutes
200℃
12 minutes
200℃
20 minutes
150℃
15 minutes
50℃
15
7. Start Buttons
• Touch the start buttons to start cooking.
• Use the correct start button for the corresponding pan.
8. Stop Buttons
• Touch the stop buttons to stop cooking at any time during cooking process.
• Use the correct stop button for the corresponding pan.
INTRODUCTION
The air fryer provides an easy and healthier way of cooking your favorite foods. By applying rapid air
circulation from all directions additional to a top grill, it is able to cook a variety of dishes without adding any
oil or adding just a little oil to specific ingredients in the table shown in this booklet.
BEFORE USING AIR FRYER
1. Remove all the packing materials including any in the pan.
2. Slide out the pans, take out the drip trays by straightly pulling up. Clean pans and drip trays with a
non-abrasive sponge, with hot water and dish washing liquid. Rinse with clean water and set aside to dry.
3. Wipe clean the inside and outside of the appliance with a moist soft cloth.
4. Place the appliance on a stable, horizontal, flat and heat resistant surface.
IMPORTANT! Place the appliance on a heat-resistant surface only. Not recommended to use direct-
ly on laminated / vinyl bench top. To prevent heat damage to surface underneath, placing the air
fryer on an insulated heat pad is recommended.
COOKING WITH YOUR AIR FRYER
1. Connect the supply cord plug into a mains power outlet socket. The appliance is now in standby mode.
2. Place the ingredients into the pans.
Do not fill more than 2kg food in each basket.
3. Slide the pans back into the appliance.
CAUTION! Do not touch the pans during use or immediately after use, as the pans gets very hot
during and after cooking. Only hold by the handle.
4. Touch the power button. Select the pan to set the cooking process.
5. Select a preset function or set the time and temperature manually for the pans one by one. Then touch
the start buttons to start cooking.
6. For cooking of some ingredients, it may require turning the contents in the basket or adding small quanti-
ty of oil in the cooking ingredients during the cooking process to ensure even cooking and avoid charring of
ingredients positioned at the top of the basket. When this is needed, you can pull out the pan. The appliance
will stop heating automatically. After turning or adding oil, place the pan back into the appliance to resume
cooking.
NOTE: You may slide out the pan to check at any time during the cooking process. The appliance will pause
when the pan is taken out or powered off. The appliance will continue the cooking process if the pan is slide
in and it will power on again.
7. You can reset the time and temperature setting during the cooking process if required.
8. When you hear the "beep-beep" sound, the set time is elapsed, and the cooking cycle is completed. The
appliance is now in standby mode.
16
EN

Publicidad

loading