Steinberg Systems SBS-PT-200S Manual De Instrucciones página 58

1. Auto sleep function:
• While holding down the "HOLD" button, turn on the unit with the "ON/OFF"
button. The display will show "A._".
• Press the "ZERO" button until you select the time after which you want the
automatic sleep function to occur: "A.120" (after 120 seconds); "A.180" (after 180
seconds); "A.300" (after 300 seconds); "A.off" (function off).
2. Display backlight function:
• While holding down the "HOLD" button, turn on the unit with the "ON/OFF"
button. The display will show "A._".
• Press the HOLD button. The display will indicate the message "L._".
• Press the "ZERO" button until the option is selected:
– enable backlighting "L.on"
– turn the backlight off "L.off"
– turn on the backlight only after the reading is stabilized "L.Stb"
– turn on the backlight after placing the weight on the platform "L.Aut"
3. Determining the data transmission speed:
• While holding down the "HOLD" button, turn on the unit with the "ON/OFF"
button. The display will show "A._".
• Press the "HOLD" button twice. The display will indicate "b._".
• Press the "ZERO" button until the option is selected: "b.9600"; "b.1200"; "b.2400";
"b.4800".
4. Data transmission mode:
• While holding down the "HOLD" button, turn on the unit with the "ON/OFF"
button. The display will show "A._".
• Press the "HOLD" button three times. The display will show the message "n._".
• Press the "ZERO" button until the option is selected:
– continuous data transfer "n.Con"
– data transfer only after the computer issues a command "n.Conn"
– data transfer while holding down the "HOLD" button - "n.key"
– data transfer after the reading has stabilized "n.Stb"
5. Measurement unit selection function: