TruVision TVGP-M01-0201-PTZ-G Guia De Instalacion página 10

EN
EN
Installation environment
When installing your product, consider these
factors:
• Electrical: Install electrical wiring carefully.
It should be done by qualifi ed service
personnel. Always use a proper PoE switch
or a 12 VDC UL listed Class 2 or CE certifi ed
power supply to power the camera. Do not
overload the power cord or adapter.
• Ventilation: Ensure that the location planned
for the installation of the camera is well
ventilated.
• Temperature: Do not operate the camera
beyond the specifi ed temperature, humidity,
or power source ratings. The operating
temperature of the camera with heater is
between -30 to +60°C. Humidity is below
90%.
• Servicing: Do not attempt to service this
camera yourself. Any attempt to dismantle
or remove the covers from this product will
invalidate the warranty and may also result in
serious injury. Refer all servicing to qualifi ed
service personnel.
8