TruVision TVGP-M01-0201-PTZ-G Guia De Instalacion página 12

EN • Do not power up the PTZ dome until
installation is completed.
Cable description
See page 2.
1. Memory card slot
2. Reset button: Press this button for 10 s when
the camera is powering up or rebooting to
restore the default settings, such as user
name, password, IP address, port number,
etc.
3. Network cable
4. Power input.
5. Alarm I/O
6. Audio I/O
7. Power output
Installing the camera
See pages 4 to 7.
To prevent injury, the camera must be securely
attached to the ceiling/wall in accordance with the
installation instructions. The ceiling or wall must
be strong enough to be able to withstand more
than eight times the weight of the camera and its
10