Ruby S 10-20 G Manual De Instrucciones página 26

INSTRUCTIONS MANUAL
3 · 24H TIMER FUNCTION
1.Open the appliance as working conditions, (fan, warm, hot are all ok). This function through by Remote
control button.
2. Press button, set the timer up to 24 hours, keep press
00--24 (00=close, 01=1hour, 02=2 hours...24=24 hours ect.) and the
PS: set as "00" means no set timer, the
4 · THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions, (fan, warm, hot are all ok). This function only through by
Remote control.
2. To adjust temperature,press the
10 ºC to 49 ºC.
3. When the air temperature drops 2 degree below the set temperature,the heater will start heating with
"I/W"(1000W).
4. When the air temperature drops 4 degree below the set temperature ,the heater will start heating
with"II/H"(2000W).
5. When the air temperature high 1 degree or ≤ the set temperature,the heater will blow the cold air .
5 · WEEK TIMER FUNCTION
1. Open the appliance as working conditions, (fan, warm, hot are all ok). This function only through by
Remote control.
2. WEEK Press button 1st time,
HOUR Press button 2nd times, LED display front "00" twinkle, press
Hours from 01--00 (01=1 o'clock, 02=2 o'clock...00=24 o'clock ect.)
MINUTE Press button 3rd times,LED display behind "00" twinkle
from 00--59 (01=1 Minute, 02=2 Minute ect.)
With the
light on, it means open time.
HOUR Press button 4th times, LED display front "00" twinkle, press
Hours from 01--00 (01=1 o'clock, 02=2 o'clock...00=24 o'clock ect.)
MINUTE Press button 5th times, LED display behind "00" twinkle
from 00--59 (01=1 Minute, 02=2 Minute ect.)
With the light on, it means close time.
light is off.
to set the desired temperature and the temperature set from
lights on,means "Monday".
26
RUBY S 10-20 G
button to increase the hours from
light is on.
two buttons set the
two buttons set the Hours
two buttons set the
two buttons set the Hours