Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS MANUAL
Master button
One start button
REMOTE CONTROL VIEW
PS: After the machine is started up, when the heating function is not turned on, it will be shut down
directly. The product will not go into the process of shutdown waiting for 30 seconds, but will go into the
standby state directly.
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance automatically in case
of overheating. For example: due to the total or partial obstruction of the vents. In this case, unplug the
appliance, wait about 30 seconds for it to cool and remove the object which is obstructing the vents.
Then switch it back on as described above. The appliance should now operate normally. If the problem
persist, please contact Customer Service for assistance.
1. Remote control, please use Lithium battery CR2025 3V.
1.
Main power button
2. "24H"
Setting timer from 1-24 hours
3. "MODE"
COLD, WARM, HOT 3 setting for selection
4. "Swing"
Louver swing up and down
5. "LOCK"
Child-Lock function for heater
6. "AUTO"
Window Open Function
7. "Delay"
Adjust temperature
8. "W.Timer"
Set the timer of one week
9. "+"
Increase
10. "-"
Decrease
11. "Set"
Set real time
28
RUBY S 10-20 G
Publicidad
