DITEC DAB305 Manual Del Usuario página 15

Declaration of incorporation
We
ASSA ABLOY Entrance Systems AB
Lodjursgatan 10
SE-261 44 Landskrona
Sweden
declare under our sole responsibility that the type of equipment:
Ditec DAB305 Swing door operator
complies with the following directives:
2014/30/EU ElectroMagnetic Compatibility Directive (EMCD)
2006/42/EC Machinery Directive (MD) the following essential health and safety requirements:
1.1.2, 1.1.3, 1.2.1, 1.2.2, 1.2.3, 1.2.4.2, 1.2.6, 1.3.9, 1.4.3, 1.5.1, 1.5.2, 1.5.11, 1.7.2, 1.7.4, 1.7.4.1, 1.7.4.2. Tech-
nical documentation for safe integration is provided.
2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment
with the applicable amendments (RoHS)
Harmonized European standards which have been applied:
EN 60335-2-103:2015
EN 61000-6-3:2007+A1:2011
EN 16005:2012/AC:2015
Other standards or technical specifications, which have been applied:
BBR
DIN 18263-4:1997
IEC 60335-2-103:2002 ed. 1/2011 ed. 2.1
EN 1634-1:2008
Certificate issued by a notified or competent body concerning the equipment:
RISE C900020
Relevant technical documentation has been compiled according to 2006/42/EC annex VII section B.
The manufacturing process ensures the compliance of the equipment with the technical file.
Relevant information about the partly completed machine will be handed over at a motivated and specified request
from national authorities.
The equipment must not be used until the final installed automatic door system has been declared in compliance
with the machinery directive 2006/42/EC.
The CE mark was first applied 2020-03-17.
Compilation of technical documentation applicable to the listed essential health and safety requirements:
Matteo Fino
Business Area PGA
Ditec S.p.A.
Largo U. Boccioni, 1 - 21040 Origgio (VA) - Italy.
Signed for and on behalf of ASSA ABLOY Entrance Systems AB by:
Place Date
Origgio 2021-11-11
1020517-DImulti-4.0
EN 61000-6-2:2005
EN ISO 13849-1:2015
EN 60335-1:2012/AC:2014+A11:2014+A13:2017
+A1:2019+A14:2019+A2:2019
BVL
IEC 60335-1:2010 ed. 5
EN 1158:1997+A1:2002+AC:2006
Signature Position
Matteo Fino President B.A. PGA
Issue 2022-04-22
EI
DoI 1020516-DIen-4.0
15