Publicidad
WARNING
Disconnect the tool from the power source
before making adjustments, service o maintenance to the jig
saw.
Cleaning and care
• Keep the tool free of dust. Never use water or
chemical-based cleansing materials. Clean only using a
clean and dry cloth.
• Keep the ventilation slots always clean and free of
obstructions to guarantee the right cooling of the motor.
• Check the feeding cable regularly to look for any
damages. In case the cable is damaged change it in a
Authorized service center.
Service
• The tool shall only be serviced in a
Authorized service center. Service and maintenance carried
out by non-qualified people may be dangerous and could
cause severe personal injury. It also makes the product
warranty void.
10
ENGLISH
Maintenance
Carbon brush replacement
• Carbon brushes need to be checked regularly and when
worn, replaced in a
Service Center. After the carbons have been replaced, ask
the technician to inspect if they run freely in the carbon
housing and to let run the machine 5 minutes to make
even the contact of carbon and commuter.
• Use only
brushes, designed specifically with the strength and electric
resistance fit for each type of motor. Carbon brushes that
are out of specifications may damage the motor.
• When replacing carbon brushes always change both
pieces.
Lubrication
• Regularly apply a drop of lubricant to the roller guide for
proper blade slippage when cutting.
Notes
Authorized
original spare carbon
Publicidad
