Manuales relacionados para Truper CALA-NX6
Resumen de contenidos para Truper CALA-NX6
- Página 1 Manual Variable speed 1 Hp jig saw Power Applies for: Code Model 15348 CALA-NX6 CALA-NX6 Read the user’s manual thoroughly CAUTION before operating this tool.
- Página 2 Manual before Parts using the tool. Preparation Keep this manual for future references. Start up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Authorized service centers Warranty policy CALA-NX6 ENGLISH...
- Página 3 Technical data CALA-NX6 Code 15348 Description Variable speed jig saw Voltage 127 V Frequency 60 Hz Current 5.9 A Power 1 Hp Variable Speed 800 strokes / min - 3 000 strokes / min Stroke length 1” Miter cutting 0° - 45° left / right...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for jig saws Select the adequate blade While Operating the Jig saw CAUTION CAUTION • Select the adequate blade for the • Hold the tool by the insulated griping material. Reduce the risk of severe personal injury and parts when there is risk of making contact with hidden make the job faster.
- Página 6 Parts Lock-on Speed button control Handle Saw blade Power cord protector Switch Balancing Action control Work light Power cord Fast saw Blade support Protection Cutting angle Blocking lever Base Plate Vacuum Parallel guide Roller Cleaner adaptor Orifices Guide Parallel Base plastic Guide Protector Preparation...
- Página 7 • Connect thw dust extraction hose to the dust extraction port of the machine with an internal diameter of 1 3/8” (or 35 mm) (not compatible with Truper brand vacuums). • Connect the dust extraction hose to a dust extractor or vacuum cleaner.
- Página 8 Preparation Speed Control • The tool can run in different speeds. These are selected by adjusting the speed selector found in the tool rear side (F). • The specified number of passes depends on the material and working conditions, it is advisable to determine it by testing.
- Página 9 Start up Balancing Action Control The balancing action varies the saw glade cutting angle to increase the cut efficiency. This can also be adjusted while no-load operation. To see more details, see the balancing action selection table. Do not use excessive force on the saw blade when cutting with balancing action.
- Página 10 Maintenance WARNING Disconnect the cable from the power Service outlet before making adjustments, service or maintenance on the tool. Service to the tool shall only be performed in a Authorized Service Center. Service Cleaning and care and maintenance performed by non-qualified people may •...
- Página 11 Authorized service centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 06060, where you can also purchase parts, components, consumables and accessories. The costs of transportation of the product that derive from its fulfillment of its service network are included. Truper will not require any proof of purchase to make the warranty effective. Phone number 800-018-7873. Made in China.