Jägermeister G4TM Manual De Instrucciones página 119

Replacing a defective fuse
Electric shock may occur when working on the device.
 Before working on the device, remove the mains
 Turn the main switch (1) to
position "0".
 Pull the mains plug out of the
socket.
 Open the fuse holder (2) with
a screwdriver.
The fuse holder (2) opens.
 Remove the blown fuse (1).
 Insert the replacement fuse
into the fuse holder (2).
 Carefully push the fuse holder
(2) back into the housing until
it clicks into place.
Replacing the fuse of the extension socket
 Open the fuse holder with a Torx screwdriver.
 Take out the fuse holder.
 Replace the fuse in the fuse holder.
 Push the fuse holder back in and screw it in place.
WARNING
plug from the socket. To do this, pull out by the
mains plug.
English instructions for use
119