Publicidad
Idiomas disponibles
Idiomas disponibles
Using the appliance
Switching on for the first time
NOTE!
After powering on the appliance "DOOR LOCK" will be illuminated on the user interface for the
first few seconds. This is the normal initialization process of the door lock. After the "DOOR
LOCK" sign disappears, the appliance is ready to use. Please do not open the door when the
"DOOR LOCK" sign is illuminated.
INFORMATION!
If you do not press any key within 30 seconds and no program is activated, the oven will
automatically switch to standby mode. A clock will appear on the display unit. The appliance can
also be switched to standby mode if a cooking system has been selected, but the oven is not
active.
Settings
Choose settings by pressing the Cooking Time/Settings Mode key and holding it for 3 seconds.
Use the temperature settings keys to scroll through the menu. Confirm any changes by pressing
the
key.
EN 16
After connecting your appliance to the power for the first time, or after
an extended power outage, 12:00 will flash on display.
To activate the appliance, briefly press the
Setting the clock
World Time is always shown on the lower display. The first 2 digits are
hours and the third and fourth digits are minutes. Use the Keypad keys
to set the time. Confirm your selection with the
INFORMATION!
AM/PM is automatically changed when time exceeds 12:00.
Setting the volume
You can choose between three control unit volume levels, and silent
operation. Confirm your selection with the
INFORMATION!
When the silent operation is selected, oFF will appear at the bottom
of the display unit.
key.
key.
key.
Publicidad
