Installing the speakers
PRECAUCIÓN:
The information in this section is intended for authorized service technicians only.
Requisitos previos
If you are replacing a component, remove the existing component before performing the installation process.
Sobre esta tarea
The following images indicate the location of the speakers and provide a visual representation of the installation procedure.
Pasos
1. Using the alignment posts, place the left and right speakers into their slots on the palm-rest assembly.
2. Route the speaker cable through the routing guides on the palm-rest assembly.
3. Connect the speaker cable to the system board.
Siguientes pasos
1. Install the battery.
2. Install the
base
cover.
3. Install the
SIM
card.
4. Follow the procedure in
Batería de tipo botón
Extracción de la batería de tipo botón
Requisitos previos
1. Siga el procedimiento que se describe en
2. Extraiga la
tarjeta
SIM.
3. Extraiga la
cubierta de la
After working inside your
computer.
Antes de manipular el interior de la
base.
Extracción e instalación de unidades reemplazables en campo (FRU)
computadora.
73