Publicidad
5. Remove the
4G WWAN card
6. Remove the
WLAN
card.
7. Remove the
memory
modules.
8. Remove the
M.2 2230
or
9. Remove the
M.2 2230 solid-state drive from Slot
10. Remove the
coin-cell
battery.
11. Remove the
heat
sink.
12. Remove the
assembly inner
Sobre esta tarea
The following images indicate the system board connectors.
1. WWAN card connector
3. eDP cable connector
5. Display cable connector
7. Solid-state drive Slot 1
9. Battery cable connector
11. USH-cable connector
13. Speaker cable connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
or
5G WWAN
card, as applicable.
M.2 2280
solid-state drive from Slot 1.
2.
frame.
Extracción e instalación de unidades reemplazables en campo (FRU)
2. WLAN card connector
4. Memory modules
6. System fan connector
8. Touchpad cable connector
10. Solid-state drive Slot 2
12. Coin-cell battery cable connector
83
Publicidad
