Descargar Imprimir esta página

hillvert HT-HPW-150B Manual De Instrucciones página 23

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 96
or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c)
Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges or moving parts. Damaged or tangled cords increase the risk
of electric shock.
d)
Do not use the unit if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
e)
To avoid electric shock, do not immerse the cable, plug, or the device itself in
water or other liquid. Do not use the appliance on wet surfaces.
f)
The electrical installation supplying this unit should be done by a qualified
electrician and equipped with a residual current circuit breaker that will cut off
the supply if the leakage current exceeds 30 mA for 30 ms.
g)
Before the initial use, please check whether the type of current and mains
voltage corresponds to those indicated on the rating plate.
h)
CAUTION – DANGER TO LIFE! When cleaning or using the device, never
immerse the cable, plug or the device itself in water or other liquids. Never
hold the device under running water or pour other liquids on it.
i)
Never use the unit while standing in water.
j)
Never touch the unit with wet hands or allow the electrical connections to
become wet.
k)
If you intend to use the unit outdoors, use an extension cord designed for
outdoor use and equipped with a grounding cable.
l)
If you intend to use an extension cord, the plug and socket must be watertight.
m) It is recommended that the outlet of the extension cord be at least 60 cm
above the ground.
n)
To reduce the risk of electric shock, all electrical connections should be dry and
above ground. Do not touch the plug with wet hands.
o)
This product must be grounded. Ensure that the electrical system and the
outlet to which the product will be connected is grounded.
2.2. Safety in the workplace
a) Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the device.
b) If you find any damage or irregularities in the operation of the product,
immediately turn it off and report it to an authorized person.
c)
If in doubt as to whether the device is working, contact the manufacturer's
technical service.

Publicidad

loading