Publicidad
Idiomas disponibles
Idiomas disponibles
gg) Make sure that the water used for pressure cleaning is free of any dirt, sand or
corrosive chemicals. This can adversely affect the life of the pressure washer.
hh) Caution! A high-pressure water jet can damage the surface being cleaned if
the method of use is not correct. Always test the water jet first in an open area,
and preferably on another surface that matches the structure of the one you
intend to wash.
ii) Do not use flammable cleaning agents as there is a risk of explosion.
jj) The machine is not suitable for connection to the water supply system. If the
machine were to be connected to the mains water supply, install a backflow
preventer in the inlet pipe to prevent dirty water from flowing back into the
drinking water system.
kk) Caution! Water that has flowed through the backflow preventer or through
the machine is considered unfit for drinking.
ll) Do not operate the pressure washer with the inlet water filter removed.
mm)
Always turn on the water supply before turning on the pressure
washer. Running the pump dry will cause serious damage to the machine.
nn) Never allow the unit to run for more than 1 minute without spraying water.
The resulting heat buildup will damage the pump.
oo) Never permanently activate the trigger of the gun.
CAUTION! Although the product has been designed to be safe, with adequate
safeguards, and despite the additional safety features provided to the user,
there is still a slight risk of accident or injury when handling the unit. Caution
and common sense are advised when using the product.
3. Instructions for use
The device is designed to wash various surfaces using a high-pressure stream of
liquid.
The user is responsible for any damage resulting from misuse.
3.1. Product overview
Publicidad
