Publicidad
Idiomas disponibles
Idiomas disponibles
Owner's Manual |
Assembly Guide
!
!
WA r n I n G
WA r n I n G
The manufacturer has made
The manufacturer has made
every effort to eliminate any
every effort to eliminate any
sharp edges. However, you
sharp edges. However, you
should handle all compo-
should handle all compo-
nents with care to avoid
nents with care to avoid
accidental injury.
accidental injury.
Some parts may contain
Some parts may contain
sharp edges, especially
sharp edges, especially
as noted in these instruc-
as noted in these instruc-
tions. Wear protective
tions. Wear protective
gloves if necessary.
gloves if necessary.
!
!
WA r n I n G
WA r n I n G
The use of alcohol, prescrip-
The use of alcohol, prescrip-
tion or non-prescription
tion or non-prescription
drugs may impair the
drugs may impair the
consumer's ability to prop-
consumer's ability to prop-
erly assemble or safely
erly assemble or safely
operate the appliance.
operate the appliance.
!
C A U T I o n
Two people are recom-
mended for the assembly
of this product.
06
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Make sure all
Please read all instructions thoroughly before proceeding. Make sure all
the plastic packing material is removed before assembling.
the plastic packing material is removed before assembling.
Find a large, clean area to assemble your unit. Please refer to the parts list and
Find a large, clean area to assemble your unit. Please refer to the parts list and
assembly diagrams as necessary.
assembly diagrams as necessary.
S T E P 0 1
Remove the griddle body
from the packaging and lay it upside
down on a smooth, flat surface.
Insert one (1) left leg and one (1)
upper right leg into the front leg
slots. Use four (4) M6x12 screws to
attach the front panel and secure
the front legs. (Do not fully tighten
these screws yet.)
S T E P 0 2
Insert one (1) left leg and
one (1) upper right leg into the rear
leg slots. Use four (4) M6x12 screws
to attach the back panel and secure
the rear legs. (Do not fully tighten
these screws yet.)
S T E P 0 3
Remove the two lower
right legs from the box and insert
them into the upper right legs.
Model 1967
Publicidad
