Publicidad
Idiomas disponibles
Idiomas disponibles
Charging/Local cleaning
Press briefly to start charging
Long press to start local cleaning mode
Wifi reset
Press both buttons simultaneously for 3 seconds.
System reset
When the robot's system has bug, please press this button to
restart the system.
E.g: The radar is always turning, or the robot can't be turned off.
2. Use the robot with remote control
1
2
3
4
5
6
Note:
1. You can select quiet mode by pressing Mute Button, under quiet model, the robot will not make
any voice. Pay attention that when you selected quiet mode with remote control, you can not
adjust voice volume in application, Unless you set the robot back to sound mode with remote
control.
2. The LED lights of the two buttons on robot will normally turn on unless you switch off the machine.
To save power consumption, you can turn off them with remote control.
3. You can select 0-1-2-3-4 five level of suction power with remote control, 0 level is for mop
function, under 0 level the robot just climbs slowly and does not vacuum dust. You can buy water
tank+mop accessories on www.senya.fr to use this function.
3. Use the robot with Senya Smart™ Application
Before control the robot by Application, make sure the robot is in standby mode, otherwise press the
power button for 3s to activate the robot.
Auto cleaning start/pause
1
7
Turn left
3
5
Mute button
8
7
Recharging start/pause
9
10
9
UVC light button
11
Spot cleaning start/pause
11
2
4
6
8
10
46
System reset button
Go forward
Adjustment of suction power
Light On/Off
Turn right
Adjustment of water flow
Publicidad
