Name of the device
Covered area by the robot
and Position of the latter
Instant duration of
cleaning routine
Water level
Only mop mode select
Spot mode
Area mode
Room mode
Auto mode
3.1 Cleaning mode of robot
The robot provides 4 kinds of cleaning mode: Spot mode,Area mode, Room mode and Auto mode.
CAUTION! Before use, please clear all scattered lines/wires on ground to avoid wrapping and cause the
robot works incorrectly.
3.1.1 Spot mode
This mode is the most effective when cleaning a particularly dirty area. With SPOT mode, the robot
concentrates on a 1.5m x 1.5m area. At the same time, it activates its MAX vacuum power to vacuum
the dust from the floor more easily.
2
1
3
Spot
1. Click <Spot>.
2. Select the point to be cleaned on the map.
3. Click <Star> to start cleaning.
Edition
Instant battery life
Instant cleaned surface
UVC mode select
Restricted Area Setting
Partition editing
Recharge/Pause
Start/Pause/Continue the robot
Fan level selection
Options:Other settings
47