Bona OptiSpread UX Manual De Funcionamiento página 14

6.2.3. Battery Charge Indicator
The three green LEDs of the battery charge indicator indicate the state of charge of the
battery. For safety reasons, it is only possible to check the state of charge when the power
tool is at a standstill. Press the button to show the state of charge. This is also possible
when the battery is removed.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Flashing light 3 x green
If no LED lights up after pressing the button, then the battery is defective and must be
replaced.
6.2.4. Filling/changing the tubular bag
Before doing any work on the Bona Optispread UX, remove the battery.
To fill the Bona OptiSpread UX and to change an empty tubular bag, place the machine on
the support provided. Secure the machine at the head end with the rubber strap.
NEVER PLACE THE BONA OPTISPREAD UX ON THE TOOTHED RACK.
THIS CAN LEAD TO MALFUNCTIONS!!
1. Unscrew the nozzle head, which is attached to the filling tube with a union nut and
put it aside.
2. Remove the empty tubular bag
3. Unlock the toothed rack and pull it out again completely using the hook handle
4. Insert the new tubular bag horizontally and remove the clip. When inserting, please
make sure that the bag does not kink! Tubular bags that do not fit into the filling
tube due to their larger diameter must not be used! Do not try to force the bag into
the filling tube! ➌ ➍
5. Screw the nozzle head back on and carefully push the unlocked toothed rack forwards
until the squeezing disc touches the tubular bag. When attaching the nozzles, make sure
that the pointed end of the teeth is pointing upwards.
6. Loosen the rubber strap and take the machine off the support.
14
Capacity
≥ 2/3
≥ 1/3
< 1/3
Reserve
Operating manual
➊
➋