Bona OptiSpread UX Manual De Funcionamiento página 16

Operating manual
6.3. Adhesive application
Simply place the filled Bona OptiSpread UX on the nozzle head, press the on/off button and
walk backwards. ➎
The amount of adhesive applied depends largely on your walking speed, the nozzle size and
the feed, which is infinitely adjustable from 1-9. ➏
You can preset the maximum feed of the rack with the volume flow limiter. High values mean
high feed, small values mean low feed. The maximum volume flow can also be readjusted
during operation.
➎ ➏
6.3.1. Notes
When squeezing out of a new nozzle for the first time, it takes a moment for the adhesive to
emerge from the openings.
If the on/off switch is released, the adhesive application is stopped immediately. To do this,
the piston is moved back slightly (audible). This ensures that no more adhesive is dispensed
after the on/off switch is released. This enables precise and dosed adhesive application.
Tubular bag: If possible, you should try to completely empty the adhesive bag. If this is
not possible, the opened tubular bag can remain in the machine for up to 12 hours. The
machine must be stored horizontally.
If work is interrupted for a longer period of time, the opened bag should be removed and
sealed with a cable tie. The bag sealed in this way can then be used again if required.
16