Ruby S 10-20 W Manual De Instrucciones página 28

INSTRUCTIONS MANUAL
7 · DELAY FUNCTION
1. This function can be use should be fit two points :
1. the appliance are plug in.
2. before the appliance working.
This function only through by Remote control.
2. Press button one time, the "Delay" light and "I/W" light are on.
from 01--24 (01=1 o'clock, 24=24 o'clock... 00=Closed ect.)
3. Press button again, the "Delay" light and "II/H" light are on.
01--24 (01=1 o'clock, 24=24 o'clock... 00=Closed ect.)
PS: Press button,screen shows number will twinkle 5 seconds,you should operate in time ,otherwise
appliance will get back to standby.
(This function is one-time and power off delay function are failure).
8 · CHILD-LOCK FUNCTION
1. This function only through by Remote control.When appliance are plug in,this function can be used in
any models.
2. Press button one time, all lights and LED display are closed ,only "Power" light on.In this condition,
both control panel and remote control are fault use.
3. Press button again, all lights are on and both control panel and remote control are use to succeed.
VISTA DO PAINEL DE CONTROLO
LED display
Heat 1000 W
Week
Power
ON/OFF button
Week
Timer
W-Timer
Power
ON/OFF MODE
MODE button 24 Timmer
Window
open
AUTO 24H Delay
I/W II/H Fan/M
TIMER RECEIVER
button
28
RUBY S 10-20 W
two buttons set the Hours
two buttons set the Hours from
24
Delay
Timer
Heat 2000 W
Hour
Fan / Minute
Receiver