Publicidad
REMOVE THE HOSE
When removing, squeeze the clips (both sides) and pull.
FITTING THE TUBES AND ACCESSORIES
1. Attach the tube to the handle end of the hose.
2. The hose handle features an air regulation button which allows
suction to be reduced as required.
3. Attach the floor brush to the tube.
4. Attach the multipurpose nozzle to the tube.
Turn the rotating nozzle as the arrowhead show; it can be used
as the upholstery nozzle (for curtains and upholstery). Turn the
rotating nozzle backwards to the home position; it can be used
as the crevice nozzle (for awkward places, behind radiator; or for
hard surfaces, pelmets, delicate objects etc).
CONTROLS
Power
The on/off control is operated by On/off switch-button. (1)
Variable power
Variant speed knob (2) varies the suction power as required .For
example, maximum suction can be used for cleaning carpets, hard
floors etc, and reduced suction for cleaning upholstery and curtains.
Suction can also be controlled using the airflow regulator (6) on the
handle. Closed for maximum suction, open for reduced suction.
Automatic cable rewind
After use, unplug and press the Cord Rewind Button (3) to retract the
cable.
WARNING: When using the cable rewind, always hold the plug as the
cable will rewind quickly.
DUST DISPOSAL
To obtain the best result from your cleaner, empty the dust container
when the full dust indicator is light, otherwise the airflow and cleaning
power will be reduced.
1. Remove the dust container from the product by pressing the dust
Publicidad
