Assa Abloy SW200 Manual De Usuario página 13

General accessories
Control switch , see page 11
4
Electrical lock , see page 11
10
Key switch , see page 11
11
Elbow switch , see page 11
11
Radar , see page 11
12
Wireless transmitters (not illustrated)
Access control (not illustrated)
Door stop (not illustrated)
Safety accessories
Safety sensors , see page 11.
13
Finger protection
9
Troubleshooting
What´s wrong?
The door does not open
The motor does not start
The motor starts but
door(s) will not open
The door does not close
The door opens and closes
continuously
If the problem continues, please contact your ASSA ABLOY Entrance Systems representative.
1009952-multi-9.0
, see page 11.
Remedies
Change the setting of the mode selector.
(See page 9).
Check that there are no objects in the detection zone if a sensor is
fitted.
Check the mains power and fuse in the building.
Unlock the mechanical locks.
Check that nothing is jammed beneath the door.
Change the setting of the mode selector.
(See page 9).
Check that there are no objects in the detection zone if a sensor is
fitted.
Check that nothing is jammed beneath the door.
Check that there are no moving objects within 1-1.5 m (39"-59")
from the door if an automatic activation unit is fitted.
Issue 2021-05-25
EI
13