Publicidad
REMOVE THE HOSE
When removing, squeeze the clips (both sides) and pull.
FITTING THE TUBES AND ACCESSORIES
1. Attach the tube to the handle end of the hose.
2. The hose handle features an air regulation button (7) which allows
suction to be reduced as required.
3. Attach the floor brush (9) to the tube.
4. Attach the multipurpose nozzle (12) to the tube. Turn the rotating
nozzle as the arrowhead show; it can be used as the upholstery
nozzle (for curtains and upholstery).
Turn the rotating nozzle backwards to the home position; it can be
used as the crevice nozzle (for awkward places, behind radiator; or
for hard surfaces, pelmets, delicate objects etc).
CONTROLS
Power
The on/off control is operated by On/off switch-button. (1)
Variable power
Variant speed knob (2) varies the suction power as required .For
example, maximum suction can be used for cleaning carpets, hard
floors etc, and reduced suction for cleaning upholstery and curtains.
Suction can also be controlled using the airflow regulator (6) on the
handle. Closed for maximum suction, open for reduced suction.
Automatic cable rewind
After use, unplug and press the Cord Rewind Button (3) to retract the
cable.
WARNING: When using the cable rewind, always hold the plug as the
cable will rewind quickly.
Dust disposal
The indicator is red when the dust is full, please clean the dust bag or
replace it in time. Take out the hose connector. Press the front cover
lock (5) to open the front cover and take out the dust bag. (A)
Replace the dust bag
If paper dust bag is adopted. Please throw away and replace new one.
If textile filter is adopted, take down the dust bag, throw off the dust
and fix it again.
Publicidad
