Publicidad
Idiomas disponibles
Idiomas disponibles
of characteristics and load capacity: forklift or
transpallet.
!
Avoid pushing or dragging the equipment
when handling it.
Before lifting, secure the surrounding area
and prevent access to personnel. Move the
equipment to a minimum height above the ground
and ensure the stability of the load.
5.3.
Storage
!
GB
The equipment must be stored in a non-
aggressive, vibration-free environment.
The room temperature should be between -
10°C and +50°C. Avoid excessively humid
environments. The storage place must have an
adequate support surface to prevent deformation
of the machine or damage to the support feet.
6.
INSTALLATION
6.1.
Packaging And Unpacking
Handle and install the appliance respecting the
information provided by the manufacturer, shown
directly on the packaging, on the appliance and in
this manual.
Wear protective gloves before unpacking.
!
Avoid pushing or dragging the equipment to
avoid risks of tipping over and damage to the
structure.
The lifting and transportation system of the
packaged product envisions the use of a forklift
truck or a pallet stacker. When using these,
particular attention must be paid to balancing the
weight in order to prevent the risk of overturning
(avoid excessive tilting!).
!
ATTENTION: When inserting the lifting
device, pay attention to the power supply cable
and the position of the feet.
The packaging is made of cardboard and the
pallet of wood. A series of symbols is printed on
the cardboard packaging, which highlights, in
accordance with international standards, the
provisions to which the appliances are subjected
during loading, unloading, transport and storage.
ENGLISH
!
Do not lift the equipment in any other way
than explained in this manual.
Before placing the load, check that the floor is
level and has sufficient load-bearing capacity to
support the weight of the load.
!
Only skilled staff is allowed to perform
positioning, assembly and disassembly of the
equipment.
TOP
FRAGILE
HANDLE
WITH CARE
On delivery, check that the packaging is intact and
has
not
undergone
transportation.
The transportation company must be notified of
any damage immediately.
The appliance must be unpacked as soon as
possible to check that it is intact and undamaged.
Do not cut the cardboard with sharp tools so as
not to damage to the steel panels underneath.
Pull the cardboard packaging upwards.
After having unpacked the appliance, check that
the features correspond to those requested in the
order;
Contact the dealer immediately if there are any
anomalies.
On stainless steel equipment, carefully remove
the protective film from the inner and outer walls,
avoiding the use of metal tools.
If adhesive remains on the walls of the machine,
remove it using a non-corrosive solvent; rinse and
dry thoroughly after cleaning. It is advisable to
apply a protective oil layer to all steel surfaces.
10
DO NOT EXPOSE
TO HUMIDITY
any
damage
during
Publicidad
