Hilti Nuron SB 6-22 Manual De Instrucciones Original página 12

▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 13
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3 Description
3.1 Product overview
3.2 Intended use
The product described is a cordless bandsaw. It is designed for cutting metals and plastics.
The product is designed for operation with both hands.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Bandsaw, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Status indicators of the Li­ion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
6 English
1
Grip with safety switch
@
Safety switch
;
Speed selector switch
=
Control switch
%
Grip with control switch
&
Locking catch for cutting guide
(
Cutting guide
)
Scaffold hook
+
Battery
§
Carrier plate
/
Screw for carrier plate
:
Bandsaw blade cover
∙
Screw for bandsaw blade cover
$
Guide grooves
£
Bandsaw blade guide
|
Bandsaw blade
¡
Pulley
Q
Fastener for pulley
W
Rubber ring
E
Bandsaw blade guide channel
R
Battery status indicator
T
Battery release button
Z
Clamping lever for bandsaw blade
U
2354067
*2354067*