ETOE A1192 Manual Del Usuario página 6

1. Placement
Place ETOE Projector A1192 on a stable, flat foundation in front of the
projection surface. For the best results, the projection surface should be
white and flat.
It is unnecessary to tilt the projector towards the projection surface. You
can correct the projection image with the built-in keystone correction and
with remote control.
The distance between the projector and the projection surface
determines the image size.
2. Prepare the Remote Control
1. Prepare 2 x AAA battery, which is not included in the box.
2. Slide off the back cover to open the battery compartment, insert new
batteries (matching the polarity (+/-) indicated), and close the battery
compartment.
3. Power On
3
1. Connect the included adapter to the DC-in port of the projector
2. Connect the AC cord to the adapter
3. Plug the adapter to the outlet and the LED indicators will light on.
4. Angle the projector towards a suitable projection surface or wall.
4. Focus
1. Place the projector towards a suitable projection surface or wall,
2. Use the remote control, Press the [Focus] button,
3. Press the [Left] or [Right] button, until the picture is clear.
Get started
2
04
1
DC IN