Ignition hazard assessment / non-electrical equipment
For the following specified products:
Drum gripper RLN 200 l drum, galvanised
SK drum clamp for forklift
an ignition hazard assessment in accordance with DIN EN 13463-1:2009 has been carried out.
The assessment was carried out for Equipment group II gases, category 2, explosion group IIB and tem-
perature class T4.
The above mentioned products have no own potential sources of ignition according to the igni-
tion hazard assessment when they are used in accordance with the instructions and for expected
faults.
The products therefore do not fall under the scope of Directive 2014/34/EU and do not need to be corre-
spondingly marked.
Notice:
The equipment operator is obliged in accordance with § 3 (1) of the industrial safety
regulations (BetrSichV), to carry out a risk assessment and then, if necessary, to produce
an explosion protection document.
The products are to be included in the equipotential bonding measures in accordance
with DIN EN 1755:2010-02 and TRBS 2153.
The safety instructions in each user manual for the above named products must be ob-
served and complied with.
Bad Oeynhausen, 08.09.2016
Directive 2014/34/EU of the European Parliament and Council of 26 February 2014 Harmonised Standards for Member States for Equipment and Protective Systems for
Potentially Explosive Atmospheres
DIN EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres
DIN EN 1755:2010-02 Safety of industrial trucks - Use in potentially explosive areas - Use in areas with flammable gases, vapours, mists or dusts
TRBS 2153 Technical rules for industrial safety 2153 Avoidance of ignition sources as a result of electrostatic charge
244323_BA_INT_003_Fassklammer_SK Stapleranbaugerät
Manufacturer declaration
in accordance with DIN EN 13463-1:2009,
in line with ATEX Directive 2014/34/EU
115289
212869
i.V.
.......................................................................................
Dipl.-Ing. Joachim Fischer
Innovation Manager
Page 13 of 23 pages
Issued 09/2016