Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY/FUNCTIONAL TEST
8
1.
Connect the Medication Cup to the
Nebulizer Body by lining up the notches
on the medication cup and nebulizer
body.
Note: Ensure the Aeroneb Go handset
is not connected to the controller
when
adding
medication cup.
2.
Insert the nebulizer cable into the back of
the nebulizer unit.
3.
Add Aeroneb
the handset.
4.
Fill
the
Medication
prescribed nebulizer medication. Never
pour more than 6 mL into the cup. The
continuous line on the inside surface of
the cup indicates the maximum filling
level. CAUTION: To avoid damage
to the nebulizer unit, do not use a
syringe with needle.
5.
Place the Cap on Medication Cup.
6.
Attach Mouthpiece or Mask Connector
and mask to Nebulizer Body.
medication
Go base to the bottom of
®
Cup
to
the
with
the
Publicidad
