Descargar Imprimir esta página

Aeroneb Drive Go 7090 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

OPTIONAL DISINFECTION:
If you would like to disinfect your Aeroneb
you may choose one of the following two options; Boiling or
Vinegar Solution.
1.
BOILING:
Similarly, the Nebulizer Unit may be steam disinfected in a
standard baby bottle steam sterilizer for fifteen (15) minutes.
Refer to manufacturers instructions.
12
i.
Rinse the Nebulizer Unit (Medication Cup,
Nebulizer Body, Base and Mouthpiece or
Mask Adapter) under running hot tap water
after every use.
ii.
Shake off excess water, and allow parts to fully
air dry on a clean, dry towel, out of the reach
of children.
iii.
Bring a saucepan of DISTILLED water to the
boil and allow it to continue to boil.
NOTE: Using regular tap water to boil the
nebulizer unit will greatly reduce the life of the
nebulizer unit.
iv.
Carefully immerse the Nebulizer Unit in the
boiling water. Leave the nebulizer immersed
in the boiling water for a maximum of
twenty (20) minutes.
v.
Carefully remove the nebulizer from the boiling
water and shake off the excess water. Allow
parts to fully air dry on a clean, dry towel, out
of the reach of children.
vi.
Make certain that all parts are completely dry
before you store or use them.
Go Nebulizer,
®

Publicidad

loading

Este manual también es adecuado para:

Drive go 7091