EUFY RoboVac L35 Hybrid Manual Del Propietário página 10

3
Place the Charging Base on a level surface and against a wall.
4
Remove objects within 1.6 ft / 0.5 m of the left and right side and within
4.9 ft / 1.5 m of the front of the Charging Base. If you cannot remove the objects,
move RoboVac to a new place and check whether RoboVac can return to the
Charging Base normally; if not, contact eufy customer service for help.
5 Connect the adapter to the Charging Base and a wall outlet.
When the Charging Base connects to AC power, the LED on the Charging Base is
solid white.
•
Install the Charging Base in a location that RoboVac can easily access. It is
recommended to place the Charging Base against a wall, and on a hard-level
surface rather than on rugs or carpets.
•
Always keep the Charging Base plugged in, otherwise RoboVac will not
automatically return to it.
16 EN
Charge Your RoboVac
•
Make sure RoboVac is fully charged before use.
•
RoboVac will return to the Charging Base at the end of a cleaning cycle or
when its battery is running low.
Attach RoboVac to the Charging Base by aligning its charging pins.
•
To preserve the battery's lifespan, recharge at least once every 6 months.
Use Your RoboVac with the EufyHome App
To enjoy all available features, it is recommended to control your RoboVac via the
EufyHome app.
Before you start, make sure that:
• Your smartphone or tablet is running iOS 10.0 (or above) or Android 5.0 (or above).
• The 2.4GHz band wireless signal is enabled on your wireless router.
• RoboVac is attached to the Charging Base to ensure it has enough power during setup.
EufyHome
EufyHome
EN 17