Vortice Vort HRW 60 Mono Evo HCS Manual De Instrucciones página 35

ENGLISH
D: FILTER LED
One led (D - fig. 19) shows the status of the filters:
• LED OFF: filters are clean
• LED ON: filters to be cleaned or replaced (for each day of operation, a counter in the memory is increased
and when the maximum preset time is reached (90/180/365 days), the signalling LED lights up).
Refer to section "maintenance and cleaning".
TURNING THE DEVICE OFF
To set the device into stand-by (non-operating) mode press the FUNCTION key, the SPEED LED's will turn off.
To stop unwanted drafts turn the shutter to the closed position (2) (fig. 22)
22
1
2
35