Publicidad
Trouble Shooting
7. How to operate the Transceiver
1) Make sure the microphone is connected to the microphone jack.
2) Make sure the power cable is connected properly.
3) Make sure the antenna is connected to the antenna receptacle.
4) It is better to put the squelch control knob turned fully counter-clockwise.
5) Turn on the transceiver and control the volume knob.
6) Adjust the squelch control to the optimum level.
7) Select your desired channel..
8) To transmit press the PTT button and speak to the microphone.
9) Release the PTT button to receive.
8. Trouble Shooting
If you experience problems with your TCB-900 transceiver, first check the power
supply source. Poor connection of the power supply source can cause problems
such as no transmission, no reception or poor reception, and weak or no sound.
Ensure that the microphone and antenna are also well connected.
If this does not solve the problem, reset your transceiver as follows.
Trouble Shooting
+
This will reset the transceiver, so all the memories are erased and the param-
eters return to the initial factory setting.
This should fix most problems. In case of further difficulty, please consult your
dealer or visit our website.
9. CE Declaration
CE versions of the TCB-900 which display the CE symbol
on the product label, Comply with the essential requirements
of the Radio Equipment Directive( RED) 2014/53/EU.
14
English
1) Switch off the transceiver.
2) Pressing EMG(9/19) button, switch on the transceiver.
3) Wait for a while until the reset display diappears.
TCB-900
Publicidad
