Publicidad
Idiomas disponibles
Idiomas disponibles
EN
maintain a distance between each
person sufficient to
ensure safety.
2. Check the condition of working
area to avoid any accident by hitting
hidden obstacles such as stumps,
stones, cans, or broken glass.
3. Always ensure all handles and
guards are fitted when using the
machine. Never attempt to use an
incomplete machine or one fitted
with an unauthorized modification.
4. Do not operate the machine with a
damaged or excessively worn cutting
device. Remove any obstacle before
beginning work.
5. Inspect the entire unit for loose
fasteners and fuel leakage. Make
sure that the cutting
attachment is properly installed and
securely fastened.
STARTING THE ENGINE
1.
Keep
bystanders,
children, and animals at least 15 m
away from the operating point. If
you are approached, immediately
stop the engine.
2. The product is equipped with a
centrifugal clutch mechanism, so the
cutting attachment begins to move
as soon as the engine is started by
putting the throttle into the start
position. When starting the engine,
place the product onto the ground
in a flat clear area and hold it firmly
in place so as to ensure that neither
the cutting part nor the throttle come
into contact with any obstacle when
the engine starts.
Never place the throttle into the
high-speed position when starting
the engine.
3. After starting the engine, check to
make sure that the cutting attachment
stops moving when the throttle
is moved fully back to its original
position. If it continues to move even
after the throttle has been moved fully
back, turn off the engine and take
the unit to your authorized servicing
dealer for repair.
USING THE PRODUCT
Cut only materials recommended by
the manufacturer. And use only for
tasks explained in the manual.
1. Grip the handles firmly with both
hands using your whole hand. Place
your feet slightly apart (slightly
further apart than the width of your
shoulders) so that your weight is
distributed evenly across both legs,
and always be sure to maintain a
steady, even posture while working.
2. Maintain the speed of the engine at
the level required to perform cutting
work, and never raise the speed of the
engine above the level necessary.
3. If the unit starts to shake or vibrate,
turn off the engine and check the
whole unit. Do not use it until the
especially
trouble has been properly corrected.
4. Keep all parts of your body away
from moving cutting attachment and
hot surfaces.
5. Never touch the muffler, spark plug,
or other metallic parts of the engine
while the engine is in operation or
immediately after shutting down the
engine. Doing so could result in serious
burns or electrical shock.
6. While operating the machine be
always sure of a safe and secure
operating position especially when
using steps or a ladder.
7.
Always
surroundings and stay alert for
possible hazards that you may not
hear due to the noise of the machine.
8. To reduce fire hazard keep engine
and silencer tree of debris, leaves, or
excessive lubricant.
be
aware
of
you
9. Stop the engine before: cleaning or
when clearing a blockage; checking,
maintenance or working on the machine.
IF SOMEONE COMES
1. Guard against hazardous situations
at all times. Warn adults to keep pets
and children away from the area. Be
careful if you are approached. Injury
may result from flying debris.
2. If someone calls out or otherwise
interrupts you while working, always
be sure to turn off the engine before
turning around. Avoid operating while
people, especially children are nearby.
MAINTENANCE
1. Do not attempt to repair the machine
unless you are qualified to do so.
2. In order to maintain your product
in proper working order, perform
the
maintenance
and
operations described in the manual
at regular intervals.
3. Always be sure to turn off the
engine
before
performing
maintenance, checking procedures
or working on the machine.
The
metallic
parts
temperatures
immediately
stopping the engine.
4. When replacing the cutting
attachment
or
any
or when replacing the oil or any
lubricant, always be sure to use only
High Quality products.
5. In the event that any part must
be replaced or any maintenance or
repair work not described in this
manual must be performed, please
contact a representative from the
store nearest authorized servicing
dealer for assistance.
6. Do not use any accessory or
attachment other than those were
recommend for the unit.
checking
any
reach
high
after
other
part,
27
Publicidad
