SMA SUNNY TRIPOWER 60-10 Instrucciones página 19

SMA Solar Technology AG
6 Removing the PSU Assembly
1. Disconnect the inverter from all voltage sources (see Section 5, page 13).
2. Loosen the 2 screws (TX20) of the air flow guide
and remove them together with the air flow guide.
3. Only if the AC-RLY assembly shown is to be
removed and replaced with a new AC-RLY assembly
from the CL-REL-KIT-1-SP spare parts kit, discard the
airflow guide and 2 screws. In this case, the airflow
guide is no longer needed.
Replacement Manual
6 Removing the PSU Assembly
STP60-PSU-RM-xx-10 19