LAVAZZA INOVY COMPACT Instrucciones De Empleo página 39

N° Problem encountered
Coffee not supplied and steam
20 coming out of the capsule
compartment.
21 Coffee pours out in drops.
One of the three buttons is not
22 working and the corresponding
LED is OFF.
Contact Lavazza Authorized Service Centre for any problem or failure not included in the above list.
TROUBLESHOOTING
Possible causes
1 - The loading lever was
not set to the brewing
position.
1 - Faulty capsule.
2 - Pump working
improperly.
3 - Spout/water circuit
clogged.
4 - The machine has
limescale build-up.
1 - Mechanical blocking
Solution
Set the loading lever to the brewing
position.
Replace the capsule.
Check for abnormal noise of the
machine.
Clean the coffee dispensing spout
(see MAINTENANCE AND
CLEANING).
Descale the machine.
1 - Try to power the machine off by
removing the power cord for 10
seconds then reconnect it. Power
the machine on again and check for
proper operation of all buttons.
2 - If the problem persists, the
machine can still be used with
other buttons.
EN
Result
Ok: call solved.
Non-ok: machine being serviced.
Ok: call solved.
Non-ok: go to step 2
Ok: call solved.
Non-ok: go to step 3
Ok: call solved.
Non-ok: go to step 4
Ok: call solved.
Non-ok: machine being serviced.
Ok: call solved.
Non-ok: go to step 2
Ok: call solved.
Non-ok: machine being serviced.
39