Medisana HP 630 Manual De Instrucciones página 31

3.2 Cleaning and maintenance
Heat pad
•
Before cleaning the pad, unplug it from the mains outlet and let it cool down for
at least ten minutes.
•
The heat pad is equipped with a removable control unit (HP 630).
Unplug the control unit from the heat pad by pulling out the connection cable
from the plug on the heat pad.
•
The heat pad can be cleaned dry (with a soft brush) or as described in the
instructions on the product label.
•
Never use strong detergents or hard brushes.
•
To dry, lay the pad flat on a moisture-absorbent
towel or mat.
•
Only use the blanket again once it is completely
dry.
•
Reconnect the control unit to the heat pad in the
correct manner (please see the sketch, the
arrow markings are showing towards each other).
•
You should untangle the cable from time to time.
•
Store the unit in a clean and dry place, laid out flat with nothing covering or
resting on top of it.
3.3 Disposal
This product must not be disposed together with the domestic waste. All
E users are obliged to hand in all electrical or electronic devices,
regardless of whether or not they contain toxic substances, at a municipal or
commercial collection point so that they can be disposed of in an environmentally
accep-
table manner. Consult your municipal authority or your dealer for information
about
disposal.
E
3 Miscellaneous / 4 Warranty
3 Miscellaneous
GB
25