Publicidad
Idiomas disponibles
Idiomas disponibles
Instructiuni de utilizare si protectia muncii
Acest simbol indică faptul că piesele produsului trebuie tratate conform noii Directive privind WEEE. Aces-
te piese sunt indicate ca "WEEE" în lista pieselor de schimb (vezi "Observaţii").
Produsul integral sau piesele WEEE pot fi trimise pentru gestionare la departamentul de relaţii cu clienţii.
Pentru informaţii suplimentare, consultaţi site-ul web
http://www.atlascopco.com/.
Selectaţi Products (produse) - Links and downloads (legături şi descărcări) şi faceţi clic pe EU RoHS
and WEEE directives (Directivele UE privind RoHS şi WEEE - disponibile numai în limba ENGLE-
ZĂ).
Prezentare video pentru siguranţa cheilor dinamometrice
Aflaţi detalii referitoare la funcţiile de siguranţă ale cheilor dinamometrice marca Atlas Copco şi despre
măsurile pe care trebuie să le adopte operatorul pentru o utilizare sigură. Pentru a vedea prezentarea vi-
deo, accesaţi linkul de mai jos sau scanaţi codul QR de mai jos:
http://www.atlascopco.com/videogallery/#detail/77f67648-30f0-4b92-bab6-885ea6b054db
Instalarea
Installation
For installation guidelines refer to POWER FOCUS manual (9836 3123 01).
The tool calibration torque is stored in non-volatile memory in the tool. Any changes made to the tool
calibration torque in the POWER FOCUS will update the stored value in the tool.
Model
ETV STB32/33
ETV STB62/63
ETP STB32/33
Manevrarea
Operating
As tightening torque increase the reaction force build up equally. Make sure that the tool is in correct wor-
king order and that the controller is correctly programmed to avoid unexpected behaviour from the to-
ol,which may result in operator injury.
ETV/ETD: Check that the tool is in the correctrunning direction by turning the reverse ring,
■
Clockwise = Tool forward.
■
Anti clockwise = Tool reverse
ETP: Check that the tool is in the correct running direction by pushing the revers switch.
The soft-start function facilitates entering the screwhead and thread.
The duration of the soft start is adjustable, see the manual for thePOWER FOCUS/ drive unit.
The tool is equipped with four LED´s for specific tasks:
■
Connection LED: Indicates connection to Power Focus
■
Battery LED: Indicates battery status (flashing light for low and fixed light for empty battery)
■
Batch LED: Indicated Batch done
■
Alarm LED: A failure/event is detected
164
RO
© Atlas Copco Industrial Technique AB - 9836 9000 00
Battery
Li-ion 18V / 2.6Ah
Li-ion 30V / 2.6Ah
Li-ion 18V / 2.6Ah
ETV STB63-70-B13-B
Publicidad
