Atlas Copco ETV STB63-70-B13-B Instrucciones Del Producto página 5

ETV STB63-70-B13-B
For more information, consult the website
http://www.atlascopco.com/.
Choose Products - Links and downloads, and click EU RoHS and WEEE directives (ENGLISH only).
Product safety video for nutrunners
Learn more about safety features on Atlas Copco nutrunners and what measures the operator has to take
for a safe operation. Click the link or scan the QR code below to view the video:
http://www.atlascopco.com/videogallery/#detail/77f67648-30f0-4b92-bab6-885ea6b054db
Installation
Installation
For installation guidelines refer to POWER FOCUS manual (9836 3123 01).
The tool calibration torque is stored in non-volatile memory in the tool. Any changes made to the tool
calibration torque in the POWER FOCUS will update the stored value in the tool.
Model
ETV STB32/33/34
ETV STB62/63/64
ETP STB32/33/34
Handling
Operating
As tightening torque increase the reaction force build up equally. Make sure that the tool is in correct work-
ing order and that the controller is correctly programmed to avoid unexpected behaviour from the tool,
which may result in operator injury.
ETV/ETD: Check that the tool is in the correct running direction by turning the reverse ring,
■ Clockwise = Tool forward.
■ Anti clockwise = Tool reverse
ETP: Check that the tool is in the correct running direction by pushing the revers switch.
The soft-start function facilitates entering the screw head and thread.
The duration of the soft start is adjustable, see the manual for the POWER FOCUS/ drive unit.
The tool is equipped with four LED´s for specific tasks:
■ Connection LED: Indicates connection to Power Focus
■ Battery LED: Indicates battery status (flashing light for low and fixed light for empty battery)
■ Batch LED: Indicated Batch done
■ Alarm LED: A failure/event is detected
Preventing ESD problems
The components inside the tool and controller are sensitive to electrostatic discharge. To avoid future mal-
function, make sure that service and maintenance is carried out in an ESD approved work environment.
The figure below shows an example of an appropriate service work station.
EN
© Atlas Copco Industrial Technique AB - 9836 9000 00
Safety and operating instructions
Battery
Li-ion 18V / 2.6Ah
Li-ion 30V / 2.6Ah
Li-ion 18V / 2.6Ah
5