Keysight U2600A Serie Guia Del Usuario página 55

Table 3-1 Step-by-step descriptions for trigger function flowchart (continued)
Steps Descriptions
Step 7 Users can stop monitoring the trigger signal manually at any time. To stop monitoring, send the command
"TRIG:MON OFF".
Step 8 If trigger happen, DIO module will output 220 (as configured in Step 4). The device will return to normal IO
operation. So, when read the input value, it will return 98 (in this case).
The command "TRIG:MON:STAT?" is used to query the current monitoring status process. For example, when
this command is sent at this stage:
-> TRIG:MON:STAT?
<- +1
-> TRIG:MON:STAT?
<- +0
The "+1" indicates that trigger has happened. But this will only be shown once. If the query command is sent for
the second time, it will reset to "+0".
The monitoring process will stop after trigger signal is received.
-> TRIG:MON?
<- 0
Keysight U2600A Series User's Guide
Features and Functions 3
55