Allen + Roth VFS2-AR30DTL Manual De Instrucciones página 18

ASSEMBLING LOGS
The log set is shipped inside the heater with the stove legs. Unwrap the logs package at this time.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this heater may result in property damage or personal injury.
CAUTION: After installation and periodically thereafter, check to ensure that no yellow flame comes in
contact with any log. With the heater set to High, check to see if yellow flames contact any log. If so,
reposition logs according to the log installation instructions in this manual. Yellow flames contacting
logs will create soot.
It is very important to install the logs
exactly as instructed. Do not modify logs.
Use only logs supplied with heater.
Each log is marked with a number.
this number will help you identify the logs
when installing.
Installing Log #1
1
1. Insert log #1 onto the
rear row of pins on the
base pan.
Installing Log #4
4
4. Insert log #4 onto the left
pin of log #1 and the pin of
log #2.
Installing Log #2
2
2. Insert log #2 onto the
front left pin on the base
pan.
Installing Log #5
5
5. Insert log #5 onto the
right pin of log #1 and the
pin of log #3.
17
Provided Logs: 5
1 2 3 4 5
Installing Log #3
3. Insert log #3 onto the
front right pin on the base
pan.
3